Molded silicone patches · Humen, Dongguan
Custom Silicone Patches
PatchCraftPro makes custom silicone patches in 2D or 3D from your artwork, starting at 10 pieces per design. Send your logo, approve a free digital proof and a physical pre-production sample, and we mold your patches with the backing you choose.
Silicone is soft and flexible, so a raised silicone logo bends with caps, activewear and bags instead of fighting the fabric. Color is mixed into the silicone before molding, so it runs through the patch rather than sitting on the surface.
MOQ 10 pieces per design
Free digital proof, then a pre-production sample
Pay after you confirm the design
Free worldwide shipping on orders of US$500+ (excluding shipping), duties paid

Free design and digital proof
Unlimited free revisions before production
Molds kept 2 years for reorders
5–10% extra patches free on every order
Every patch inspected before shipping
Why silicone
Why Brands Choose Custom Silicone Patches
Silicone patches are molded from liquid silicone rubber instead of stitched, so there are no threads to fray or snag. You may also see them called silicone rubber patches or rubber badges.
Clean raised detail
Molded edges stay sharp and the depth stays even across every patch in the run.
Soft and flexible
Silicone bends and returns with stretch fabrics, cap crowns and bag panels, and it feels smooth against the skin.
Easy care
Silicone does not soak up water, so sweat, rain and mud wipe off. Backings and adhesives have their own washing limits.
Color all the way through
Pantone references are matched in the silicone itself before molding, so the color does not scratch or rub off the surface.
We make silicone patches for apparel, hats and gear. We do not make medical or skincare silicone patches.
Styles
2D and 3D Silicone Patches
Choose flat 2D levels for crisp lettering, or 3D relief for a sculpted logo with shadow and depth. 3D silicone patches usually cost more than 2D because the mold is more complex.
Relief
Thickness and minimum sizes follow the approved sample

2D Silicone Patches
Flat-topped areas on one or more levels. Molded silicone patches are usually about 2–4 mm thick, and simple text reads cleanly from about 2–2.5 mm (0.1 in) high.

3D Silicone Patches
3D silicone patches use rounded, raised relief, so the logo catches light from every angle. Raised 3D lines need about 0.8 mm; very small text works better flat on a 3D patch.
Special options
Options can be combined in one approved design

Multi-color layers
Each color is filled into its own area of the same mold, with clean borders between colors, so a detailed crest or a full brand mark works as a silicone logo patch.

Gradients, metallics and full-color printing
Gradient silicone, metallic colors and full-color printing on silicone are available when a design needs more than solid colors. We confirm the look on your sample.

Silicone Heat Transfers
A silicone heat transfer patch is pressed straight into the fabric instead of standing on top as a separate badge. Silicone heat transfers are thinner, about 0.3–1.2 mm flat or 1–3 mm raised, and suit T-shirts, activewear and other stretch garments.
Options
Color, Finish and Detail Options for Custom Silicone Patches
Pantone color matching
Send Pantone references and we match them in the silicone. Metallic shades are shown on the proof and confirmed on the sample.
Matte or gloss
Choose a soft-touch matte finish for a quiet, premium look, or gloss for more contrast and shine.
Custom shapes
Each patch is molded to the outline of your design, including cut-outs, so the edges do not fray and need no stitched border.
Detail and thickness guide
| Detail | Guide |
|---|---|
| Simple text | about 2–2.5 mm (0.1 in) high and up |
| Line width | about 0.5 mm and up |
| Raised 3D lines | about 0.8 mm and up |
| Molded patch thickness | about 1–5 mm, usually 2–4 mm |
| Silicone heat transfer thickness | about 0.3–1.2 mm flat, 1–3 mm raised |
| Final size and thickness | confirmed on your sample |

If your text or lines are finer than this at the finished size, we flag it on the proof and suggest a larger size, a flat area or a printed detail.
Price guide
Custom Silicone Patch Pricing
Silicone patch prices depend on size, quantity, 2D or 3D relief and the number of colors, and silicone usually costs less than PVC of the same size and style. The tables start at 50 pieces; orders from 10 to 49 pieces per design are quoted, and larger runs get a volume quote.
For complete pricing on all patch types, visit our pricing page to compare embroidered, woven and PVC options.
Silicone Patch Prices
Patch size = (width + height) ÷ 2. For a 3″ × 2″ design, use the 2.50″ row.
2D
| Size | 50 | 100 | 250 | 500 | 1,000 | 3,000 | 5,000 |
|---|---|---|---|---|---|---|---|
| 1.00″ | $3.82 | $2.26 | $1.15 | $0.88 | $0.79 | $0.71 | $0.58 |
| 1.50″ | $4.18 | $2.47 | $1.20 | $0.98 | $0.91 | $0.83 | $0.63 |
| 2.00″ | $4.45 | $2.69 | $1.54 | $1.19 | $1.08 | $1.00 | $0.80 |
| 2.50″ | $4.74 | $2.81 | $1.73 | $1.36 | $1.27 | $1.24 | $0.99 |
| 3.00″ | $5.12 | $2.90 | $1.85 | $1.50 | $1.39 | $1.31 | $1.04 |
| 3.50″ | $5.32 | $3.38 | $2.08 | $1.61 | $1.50 | $1.41 | $1.09 |
| 4.00″ | $5.97 | $3.79 | $2.69 | $1.79 | $1.66 | $1.56 | $1.16 |
3D
| Size | 50 | 100 | 250 | 500 | 1,000 | 3,000 | 5,000 |
|---|---|---|---|---|---|---|---|
| 1.00″ | $4.78 | $2.82 | $1.44 | $1.10 | $0.99 | $0.89 | $0.73 |
| 1.50″ | $5.23 | $3.09 | $1.50 | $1.22 | $1.14 | $1.04 | $0.79 |
| 2.00″ | $5.56 | $3.36 | $1.92 | $1.49 | $1.35 | $1.25 | $1.00 |
| 2.50″ | $5.92 | $3.51 | $2.16 | $1.70 | $1.59 | $1.55 | $1.24 |
| 3.00″ | $6.40 | $3.63 | $2.31 | $1.88 | $1.74 | $1.64 | $1.30 |
| 3.50″ | $6.65 | $4.22 | $2.60 | $2.01 | $1.88 | $1.76 | $1.36 |
| 4.00″ | $7.46 | $4.74 | $3.36 | $2.24 | $2.07 | $1.95 | $1.45 |
Wholesale Silicone Patches
Brands, distributors and repeat programs ordering wholesale or bulk silicone patches get the lowest unit price on larger runs. Reorders reuse your mold and are checked against your approved sample, with white-label production and blind shipping within agreed limits. See wholesale custom patches.
Prices in US$ per patch. Extra colors, finish and backing are confirmed with your quote. A one-time mold fee is quoted with your first order and reused for reorders when the design, size and structure stay the same. Your final price is set with the digital proof.
Backing
Backing Options for Custom Silicone Patches
Each patch takes one backing, and backing can be changed until production starts. A sewing channel has to be chosen before the mold is made.

Sew-on Silicone Patches
Sew-on silicone patches come with a flat sewing edge or a molded sewing channel around the outline, so the needle passes through the thin edge instead of the raised design. Sewing is the most secure choice for caps and workwear.

Iron-on Silicone Patches
Iron-on silicone patches use a hot-melt adhesive for a heat press or household iron, a clean option for activewear and fabrics you do not want to stitch. Settings are confirmed for your patch and fabric, and on caps or garments washed often we suggest stitching as well.

Silicone Velcro Patches
Silicone Velcro patches use a hook-and-loop backing so one patch can move between caps, bags, uniforms and tactical gear. We supply the hook side by default, and the loop side is free on request.

Peel-and-stick
An adhesive backing for cases, helmets, packaging and other hard surfaces. It is not made for frequent washing.
Applications
Where to Use Custom Silicone Patches

Silicone Hat Patches
Silicone hat patches give a cap front a clean, raised mark, and the flexible base follows the curve of the crown. We make silicone patches for hats and caps, trucker hats and beanies, sewn on or heat pressed.
Apparel and activewear
Soft silicone logos for T-shirts, hoodies and sportswear.
Jackets and outerwear
Weather-ready marks for jackets and shells.
Tactical and morale
Velcro silicone patches for kits and plate carriers.
Uniforms and teams
One approved design across staff and players.
Who we make them for
Custom Silicone Patches for Brands, Resellers and Teams
Apparel, activewear and hat brands
A matte or gloss silicone logo on caps, tees and outerwear, matched to the approved sample on every reorder.
Resellers and distributors
White-label production, blind shipping within agreed limits and your own packaging and labels for online stores and promotional distributors.
Outdoor and tactical gear brands
Velcro or sewn silicone patches for packs, jackets and kit that lives outside.
Clubs, teams and companies
Crests, event marks and staff patches, from one design to sets of several designs.
How to order
How to Order Custom Silicone Patches
Send your design, approve the proof and sample, then pay once you have confirmed the design. Every silicone order starts with a mold made from your approved proof, and each stage is timed separately so you can plan delivery.
1
Send your design
Logo, sketch or reference, with size, quantity per design, 2D or 3D, colors, finish, backing and where the patch will be used. We reply with a price, including the mold fee.
2
Artwork setup and digital proof
Color areas, raised levels and line widths are set up for molding at the finished size, then you check layout, colors, size and finish, with free changes. 1–3 days.
3
Mold and pre-production sample
The mold is made from the approved proof and a physical sample is produced for your approval. Revisions are free and unlimited until you approve. 3–7 days.
4
Pay and produce
Pay by WorldFirst payment link (major credit cards) or T/T after you confirm the design. Your approved design is molded, trimmed and finished with the backing you chose. 5–14 days.
5
Inspection and DDP shipping
Every patch is checked, then shipped by DHL, FedEx or UPS with duties paid, so nothing is due on delivery. 5–15 days in transit.
What We Check on Every Batch
- Size and outline against the approved sample
- Colors and raised levels
- Finish, lettering and artwork details
- Backing and packaging
Every batch is checked against the approved sample: size and outline, colors, raised levels, finish, backing and packaging.
Need silicone patches fast? Rush orders can be delivered in as little as 5 days
Ask for rush timing when you request your quote.

Start in the Patch Builder
Use our custom patch builder to choose silicone, the size and backing, upload artwork and request your quote in a few steps.




Featured brand work
Made to higher standards for brands
Using the same factory network and production standards as Evisu, adidas and Champion.





One team for your whole patch program
Why choose PatchCraftPro?
PatchCraftPro began as an embroidery factory in Humen, Dongguan, in 2013 and now makes embroidered, woven, PVC, silicone, printed, leather and chenille patches. Your silicone patches go through the same artwork review, proof, sample approval and inspection as our embroidered patches, and ship from China to your door with duties paid.
| Founded | 2013, founder in embroidery since 1998 |
| Factory | 1,400 m² in Humen, Dongguan |
| Machines | 14 Tajima and Barudan embroidery machines (12 production, 2 sampling) |
| Team | 46 people |
Quick product decision
Custom Silicone Patches, PVC, Embroidered, or Woven?
Silicone and PVC patches look alike at first glance, so buyers searching for silicone PVC patches are usually choosing between the two. Silicone feels softer and more flexible and usually costs less; PVC is firmer and holds a more rigid shape.
| Decision point | Silicone | PVC | Embroidered | Woven |
|---|---|---|---|---|
| Surface | Soft molded silicone, matte or gloss | Firm molded PVC | Raised visible stitching | Flat woven textile |
| Strong fit | Caps, activewear, stretch fabrics | Tactical gear, bags, rugged use | Bold emblems, stitch texture | Fine lines, small text |
| Colors | Pantone-matched, gradients available | Solid color areas | Thread colors | Thread colors |
| Price | Usually less than PVC | Mold fee, 3D costs more | Depends on coverage | Lower for fine detail |
PVC Patches
Firmer molded patches for rugged gear.
Embroidered Patches
Raised stitch texture for bold emblems.
Woven Patches
Fine detail and small lettering.
Printed Patches
Photos and full-color artwork.
Silicone patch FAQ
Questions about custom silicone patches
What is the minimum order?
10 pieces per design. The price guide starts at 50 pieces, and smaller quantities are quoted. Versions with different names or numbers each count as a separate design.
Is there a mold fee?
Yes. A one-time mold fee is quoted with your first order, based on size, complexity and relief; 3D molds usually cost more than 2D. Molds are kept for 2 years, and reorders with the same design, size and structure reuse them. There is no sample fee.
Silicone or PVC: which should I choose?
Choose silicone for a softer, flexible patch on caps, activewear and stretch fabrics; it usually costs less than PVC. Choose PVC for a firmer patch on rugged gear and bags.
Should I choose 2D or 3D?
Choose 2D for crisp lettering and flat color levels, and 3D for rounded, sculpted relief. 3D usually costs more because the mold is more complex.
Which backing should I choose?
Sew-on with a sewing channel is the most secure for caps and workwear, iron-on suits fabrics you do not want to stitch, Velcro lets the patch move between items, and peel-and-stick is for hard surfaces. Backing can be changed until production starts.
What artwork should I send?
A vector file (AI, EPS, SVG or PDF) gives the cleanest result. If you only have a sketch or an image, our team prepares the design for free and tells you if text or lines are too small at the finished size.
Do I see a proof and a sample before I pay?
Yes. You get a free digital proof, then a physical pre-production sample. Revisions are free and unlimited until you approve, and you pay after you confirm the design.
How long does production take?
Artwork setup takes 1–3 days, the mold and pre-production sample 3–7 days and production 5–14 days after approval. Transit takes 5–15 days. Rush orders can be delivered in as little as 5 days.
Is shipping free?
Yes, worldwide, on orders of US$500 or more (excluding shipping). Orders ship by DHL, FedEx or UPS with duties paid (DDP). Smaller orders get a shipping quote that already includes duties, so nothing is due on delivery.
What should I check when choosing a silicone patch manufacturer?
Ask whether the mold can be reused for reorders, whether Pantone colors are matched in the silicone, and whether you will approve a physical sample before production.